BLUMIG Range
Product description
Three phases MIG/MAG step controlled power source
BLUMIG machine range is manufactured using quality electrical components to provide fast and positive wire feed response via a 4-roll drive system. Each machine offers smooth trouble free welding operation. The reliability of this complete range make it one of the MIG references in today’s market.
The BLUMIG range offers an industrial solution with a 35% duty cycle making it ideal for maintenance & repair and manufacturing applications.
Product Advantages
✔ User-friendly interface.
✔ Large graphic display.
✔ Precise welding quality.
✔ Very good arc ignition.
Compact range with enclosed wire-feeder
| BLUMIG 243 C | BLUMIG 283 C | BLUMIG 353 C | |
| Power supply | 230 V / 400 V three phase ± 10% – 50 Hz | ||
| Primary consumption at I max. | 19 A / 11 A | 27 A / 15.6 A | 33 A – 19 A |
| Welding current | 27-200 A | 35-250 A | 35 – 350 A |
| No-load voltage | 18-35 V | 18-40 V | 18-45 V |
| Duty cycle 60% (at 40°) | 140 A | 170 A | 270 A |
| Dimensions (L x w x h) | 440 x 670 x 750 mm | 500 x 870 x 950 mm | 570 x 930 x 990 |
| Weight | 71 kg | 80 kg | 96 kg |
| Standards | EN 60974-1 – EN 60974-10 | ||
Professional range with external wire-feeder
| BLUMIG 353 S | BLUMIG 403 S | BLUMIG 503 S | BLUMIG 503 SH | |
| External wire feeder | TF 300 | TF 400 | TF 400H | |
| Power supply | 230 V / 400 V three phase ± 10% – 50 Hz | |||
| Max input current | 20 – 11 A | 25 – 14 A | 35 – 20 A | 35 – 20 A |
| Welding current | 40-350 A | 35-400 A | 50-500 A | 50-500 A |
| Open circuit voltage | 18-45 V | 18-46 V | 19-54 V | 19-54 V |
| Duty cycle 60% (at 40°) | 230 A | 270 A | 345 A | 345 A |
|
Dimensions
(L x w x h) |
500 x 1180 x 950 mm | 600 x 1250 x 1050 mm | ||
| Weight | 118 kg | 144 kg | 144 kg | 144 kg |
| Standards | EN 60974-1 – EN 60974-10 | |||
- Power source with self protected safety switch
- Pivot foot to allow easy installation of the wire feeder
- Separate wire feeder with digital display
- 1 accessory kit for solid wires 0.8-1.2 mm
- 2T/4T and spot modes
- 4 roller plate
- 3 x 7 step voltage adjustment
- Burn back time
- Slope up wire speed
- Thermal protection
- Suitable for welding with self shielded flux-cored wires without gas
- 3 inductance settings