300PSI VSG01
Grooved-End Y Type Strainer

• Installed in both Horizontal or Vertical Line with Upward Flow
• Easier and Faster to Maintain and Install
• Low Pressure Drop

Material Specifications

1. Body: Ductile Iron ASTM A 536
Standard Surface Finish: FBE coated interior and exterior
Standard Color: Red RAL3000 I Blue RAL5015
Option: Hot dip galvanized

2. Screen: Stainless Steel 304, Perforated metal
Standard: 2 – 3″(DN50 – 80): 0.062″(1.6mm) diameter perforations.
4 – 12″(DN1 00 – 300): 0.125″(3.2mm) diameter perforations.
Option: 2 -12″(DN50 – 300): 0.315″(8mm) diameter perforations.
Other perforation available upon request

3. Grooved Coupling:
Housing: Material: Ductile Iron ASTM A 536
Standard Surface Finish: Hot dip galvanized
Other material or finish available upon request
Rubber Gaskets:
Standard:
Grade “E” EPDM (Color code: Green stripe)
Temperature range -30°F to +230°F (-34°C to +110°C).
Recommended for cold and hot water service within the specified
temperature range plus a variety of dilute acids, oil-free air and
many chemical services. NOT
RECOMMENDED FOR PETROLEUM SERVICES.
Option:
Grade “T” Nitrile (Color code: Orange stripe)
Temperature range -20°F to +180°F (-29°C to +82°C). Recommended for
petroleum products, air with oil vapors, vegetable and mineral oils within the
specified temperature range. Not recommended for hot water services over
+150°F (+66°C) or for hot dry air over +140°F (+60°C).
Other material available upon request
Bolts/Nuts: Heat treated carbon steel zinc electroplated to ASTM B-633, track
head conforming to physical properties of
ASTMA-183 minimum tensile 110,000 psil758340 kPa.

4. Grooved Cap: Ductile Iron ASTM A 536
Standard Surface Finish: Hot dip galvanized, Other material or finish
available upon request

5. Plug: Malleable Iron ASTM A 197/ A 47
Standard Surface Finish: Hot dip galvanized
Threaded: NPT pipe threaded, Other threaded available upon request
Installed in both Horizontal or Vertical Line with Upward Flow